Description

Product introduction :

It is composed of tester and touch screen and integrated simulation battery, quick charge load in one with supporting QC/PD protocol.The internal integration of the tester consists of two separate simulation battery modules with corresponding to two test interfaces, and two separate two-way power supply modules with corresponding to eight test interfaces,dividing up two channels, can test two products at the same time.It is mainly used for the product of functional testing,parameter testing and performance evaluation, including external power supplies of PCBA and finished products such as power-bank，adapter and USB socket,etc. .Single device can complete most of the functional testing of product, testing quick charge without all kinds of devices such as trap detector etc.. It supports import or export files, the test results can be exported directly to USB storage devices such as USB disk in the form of documents. Manual and automatic testing is supported, which is suitable for research & debugging and performance evaluation, and more convenient for batch testing of production line.

Technical Parameters :

⋅ 10 inch LCD touch screen, the operating interface of Asundar’s OS , support English and Chinese switch;

⋅ Support QC2.0/PD2.0 quick charging protocols, can set voltage and current parameters quickly ;

⋅ Under the mode of research & debugging, manual debugging parameters, and display the curve of charge and discharge;

⋅ Automatic test & blend automatic，multiple functions of two products can be tested at one time or just testing a product of circuit with multiple ports;

⋅ It can be applied to the test of power-bank, adapter, USB socket and other products;

⋅ The charge-discharge voltage/current/power of the product can be tested;

⋅ Can test the product of over-current protection and the maximum of output current, static current;

⋅ When function increases, operation software can automatically upgrade through connect network;

⋅ Single-channel can simulate the maximum of battery 20V 10A, the maximum of two-way power 20V 5A;

⋅ Automatic mode supports start testing about scanning or plugging ;

⋅ With the function of a key detection of protocol, comparable to POWER-Z;

⋅ Small size, easy to transport and move;

⋅ Analog battery can be set in step mode，testing the node of battery protection quickly

⋅ Expandable accessories support more testing，including temperature probe，C port full PIN test box，wireless charging receiving module;

⋅ Professional production of test wires to ensure the test of large current and reliability , random equipped with a set;

⋅ Replaceable tie-line, the connection of head can be replaced at any time after the loss, no need to replace the whole, reduce the cost, a random set, later need to buy separately;

⋅ D+/D- in PD mode is testable.